SPRAY ADHESIVE A-32

450ml

Spray Adhesive A-32
Permanent or Temporary Bond Non-Wrinkling

• CARBOARD
• PLASTIC FILMS
• FORM RUBBER
• CLOTH
• GLASS-WOOD
  

CAUTION:

SHAKE WELL BEFORE USING

Apply to clean surfaces only. Hold can 6' to 8' from surface to be bonded and spray a uniform coat.

FOR PERMANENT BONDS: On porous materials both surfaces must be coated. Allow sufficient drying time for cement to become tacky before joining

FOR TEMPORARY BONDS: Spray a light coat to one surface and allow to dry at least 5 minutes before mounting. Surfaces can then be easily removed when desired without transfer.

AFTER USE: To dear valve of adhesive - hold can bottom up and spray a small amount. Spray tips may be cleaned with turpentine.

1. Do not store above 40 °C.
2. Do not puncture (even when empty)
3. Keep away from source of ignition.
4. Keep away from children.

Net WT: 312 G.