GLASS-WOOD
CAUTION:
SHAKE WELL BEFORE
USING
Apply to clean surfaces only.
Hold can 6' to 8' from surface to be bonded
and spray a uniform coat.
FOR PERMANENT BONDS: On
porous materials both surfaces must
be coated. Allow sufficient drying time for cement
to become tacky before
joining
FOR TEMPORARY BONDS:
Spray a light coat to one surface and allow
to dry at least 5 minutes before mounting. Surfaces
can then be easily removed
when desired without transfer.
AFTER USE: To dear valve of
adhesive - hold can bottom up and spray
a small amount. Spray tips may be cleaned with
turpentine.
1.Do not store above 40 °C.
2.Do not puncture (even when empty)
3.Keep away from source of ignition.
4.Keep away from children.
Net WT: 312 G.
